ISO 13164-3:2013

Water quality — Radon-222 — Part 3: Test method using emanometry

Standard Details

ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.

The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l⁻¹ to several hundred thousand becquerels per litre for a 100 ml test sample.

This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices.

This test method can be applied on field sites or in the laboratory.

Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring

General Information

Status : Published

Standard Type: Main

Document No: ISO 13164-3:2013

Document Year: 2013

Pages: 23

Edition: 1

Section Volume:
ISO/TC 147/SC 3. Radiological methods

ICS:
13.060.60 Examination of physical properties of water
13.280 Radiation protection
17.240 Radiation measurements

Preview Document

Life Cycle

Currently Viewing

Published

ISO 13164-3:2013

ISO 13164-3:2013

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form