logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 27108:2010

Water quality — Determination of selected plant treatment agents and biocide products — Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)

Standard Details

ISO 27108:2010 specifies a method for the determination of the dissolved amount of selected plant treatment agents and biocide products in drinking water, ground water and surface water by solid‑phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC‑MS). The limit of determination depends on the matrix, on the specific compound to be analysed and on the sensitivity of the mass spectrometer. For most plant treatment agents and biocides to which ISO 27108:2010 applies, it is at least 0,05 µg/l. Validation data related to a concentration range between 0,05 µg/l and 0,3 µg/l have been demonstrated in an interlaboratory trial.

This method may be applicable to other compounds not explicitly covered by ISO 27108:2010 or to other types of water. However, it is necessary to verify the applicability of this method for these special cases.

General Information

Status : Published
Standard Type: Main
Document No: ISO 27108:2010
Document Year: 2010
Pages: 37
Edition: 1
  • ICS:
  • 13.060.50 Examination of water for chemical substances

Life Cycle

Currently Viewing

Published
ISO 27108:2010
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +