logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO/TS 17951-1:2016

Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation

Standard Details

ISO/TS 17951-1:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by flow injection analysis (FIA). Any insoluble or complexed fluoride is converted to fluoride ion by a manual distillation procedure from sulfuric/phosphoric acid. Fluoride ion in the distillate is measured using flow analysis with lanthanum alizarin complexone and spectrometric detection. This method is applicable to industrial waste waters, effluents, surface waters, ground waters, leachates. It is not recommended for drinking waters where a distillation step is not required. In ISO/TS 17951-1:2016, two working ranges are described:

- working range I: 0,1 mg/l to 1 mg/l;

- working range II: 1 mg/l to 10 mg/l.

The specification of the calibration solutions are to be adapted accordingly.

General Information

Status : Published
Standard Type: Main
Document No: ISO/TS 17951-1:2016
Document Year: 2016
Pages: 12
Edition: 1
  • ICS:
  • 13.060.50 Examination of water for chemical substances

Life Cycle

Currently Viewing

Published
ISO/TS 17951-1:2016
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +