logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 61788-18:2013 (EN-FR)

Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors

Standard Details

IEC 61788-18:2013 specifies a test method detailing the tensile test procedures to be carried out on Ag/Bi-2223 and Ag/Bi-2212 superconductive composite wires at room temperature. This test is used to measure the modulus of elasticity and to determine the 0,2 % proof strength. When the 0,2 % proof strength could not be determined due to earlier failure, the stress level at apparent strains of 0,05 %, 0,1 %, 0,15 %, 0,2 %, 0,25 % with increment of 0,05 % is measured. The values for elastic limit, fracture strength, percentage elongation after fracture and the fitted type of 0,2 % proof strength serve only as a reference. The sample covered by this test procedure should have a round or rectangular cross-section with an area of 0,3 mm2 to 2,0 mm2 (corresponding to the tape-shaped wires with width of 2,0 mm to 5,0 mm and thickness of 0,16 mm to 0,4 mm). Key words: superconductivity, mechanical properties measurement

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 61788-18:2013 (EN-FR)
Document Year: 2013
Pages: 80
Edition: 1.0
  • Section Volume:
  • TC 90 Superconductivity
  • ICS:
  • 17.220.20 Measurement of electrical and magnetic quantities
  • 29.050 Superconductivity and conducting materials

Life Cycle

Currently Viewing

ACTIVE
IEC 61788-18:2013 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +