ISO 20264:2019

Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes

Standard Details

This document specifies the use of FTIR spectrometry for determining the concentrations of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes. The method can be employed to continuously analyse sample gas which is extracted from ducts and other sources. A bag sampling method can also be applied, if the compounds do not adsorb on the bag material, and is appropriate in cases where it is difficult or impossible to obtain a direct extractive sample.

The principle, sampling procedure, IR spectral measurement and analysis, calibration, handling interference, QA/QC procedures and some essential performance criteria for measurement of individual VOCs are described in this document.

NOTE 1 The practical minimum detectable concentration of this method depends on the FTIR instrument (i.e. gas cell path length, resolution, instrumental noise and analytical algorithm) used, compounds, and interference specific (e.g. water and CO₂).

General Information

Status : Published

Standard Type: Main

Document No: ISO 20264:2019

Document Year: 2019

Pages: 32

Edition: 1

Section Volume:
ISO/TC 146/SC 1. Stationary source emissions

ICS:
13.040.40 Stationary source emissions

Preview Document

Life Cycle

Currently Viewing

Published

ISO 20264:2019

ISO 20264:2019

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form