logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J542_199106 : 1991

STARTING MOTOR MOUNTINGS

Standard Details

The purpose of this SAE Recommended Practice is to provide standardized dimensions for mounting starting motors. (See Figures 1 through 4 .)It is recommended that a full register diameter having a minimum depth of 2.54 mm (0.100 in) be provided in the flywheel housing to insure proper control of gear center distance and clearance between pitch diameters. The clearance between the starting motor pilot diameter and the register diameter in the flywheel housing should be 0.03 mm (0.001 in) minimum to 0.25 mm (0.010 in) maximum.Text noted with an asterisk in Figures 1 , 2 , and 3, should not exceed root radius of pinion in order to provide clearance for the flywheel.The face of the starting motor mounting flange should be relieved at its junction with the pilot diameter to avoid mounting interference with flywheel housing.For backlash allowance between the pinion and ring gear refer to SAE J543.Dimensional units—millimeter (inch)

Cross Reference: J543

General Information

Status : Revised
Standard Type: Main
Document No: SAE J542_199106 : 1991
Document Year: 1991
Pages: 4

Life Cycle

Currently Viewing

Revised
SAE J542_199106 : 1991
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +