ASTM B999 : 15(2022)

1.1 This specification covers the requirements for electrodeposited coatings of titanium and titanium-zirconium alloys on conductive and non-conductive substrates for engineering (functional) uses. The coatings of titanium-zirconium alloys are those that range in zirconium between 10wt% and 14wt% zirconium and are known as “terne” metallic electrodeposits.

1.2 This specification applies for both conductive (metallic) substrates and non-conductive (plastics, fibers, carbon foam, etc.)

1.3 Electrodeposits of titanium and titanium-zirconium alloys on aluminum and conductive substrate and nonconductive substrate are produced where it is desired to obtain atmospheric corrosion resistance. Deposits of titanium and titanium-zirconium alloys particularly on aluminum have shown to have excellent corrosion protective qualities in atmospheric exposure, especially when under-coated by electroless nickel. Titanium and titanium-zirconium alloy deposits provide corrosion protection from dilute sulfuric acid, are used for lining of brine refrigeration tanks, chemical equipment apparatus, storage batteries, and as a wear coating for bearing surfaces.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International StandardDetails, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.