ASTM B333 : 03(2008)

Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

Standard Details

1.1 This specification covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service.

1.2 The following products are covered under this specification:

1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.

1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

TABLE 1 Chemical Requirements

Element	Composition Limits, %
Element	Alloy N10001	Alloy N10665	Alloy N10675	Alloy N10629	Alloy N10624
Nickel	remainder^A	remainder^A	65.0 min	remainder^A	Bal
Molybdenum	26.0–30.0	26.0–30.0	27.0–32.0	26.0–30.0	21.0-25.0
Iron	4.0–6.0	2.0 max	1.0–3.0	1.0–6.0	5.0-8.0
Chromium	1.0 max	1.0 max	1.0–3.0	0.5–1.5	6.0-10.0
Carbon, max	0.05	0.02	0.01	0.01	0.01
Silicon, max	1.0	0.10	0.10	0.05	0.10
Cobalt, max	2.5	1.00	3.0	2.5	1.0
Manganese, max	1.0	1.0	3.0	1.5	1.0
Phosphorus, max	0.04	0.04	0.030	0.04	0.025
Sulfur, max	0.03	0.03	0.010	0.01	0.01
Vanadium	0.2–0.4	...	0.20 max	...	...
Nickel plus Molybdenum	...	...	94.0–98.0		...
Aluminum	...	...	0.50 max	0.1–0.5	0.5
Columbium (Nb), max	...	...	0.20		...
Copper, max	...	...	0.20	0.5	0.5
Tantalum, max	...	...	0.20		...
Titanium, max	...	...	0.20		...
Tungsten, max	...	...	3.0		...
Zirconium, max	...	...	0.10		...
Magnesium, max	...	...	...	...	...

^A See Specification B 906.

General Information

Status : Historical

Standard Type: Main

Document No: ASTM B333 : 03(2008)

Document Year: 2003

Pages: 3

Section Volume:
02.04 Volume 02.04 Nonferrous Metals - Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contact, and Connectors