Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
1.1 This specification covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 40 to 70 % concentration by volume in water, or when prediluted glycol base engine coolants 50 volume % or higher engine coolant concentrate are used without further dilution, they will function effectively to provide protection against freezing, boiling, and corrosion.
1.2 The coolants governed by this specification are categorized as follows:
Coolant Type | Description |
|
|
I | Ethylene glycol base concentrate |
II | Propylene glycol base concentrate |
V | Ethylene glycol base concentrate |
|
|
III | Ethylene glycol predilute 50 volume % or higher engine coolant concentrate |
IV | Propylene glycol predilute 50 volume % or higher engine coolant concentrate |
VI | Ethylene glycol base predilute |
1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.