ASTM A489 : 12

Standard Specification for Carbon Steel Lifting Eyes

Standard Details

1.1 This specification covers weldless forged, quenched, and tempered carbon steel threaded lifting eyes (formerly eyebolts) for overhead lifting.

Note 1—Lifting eyes carrying this specification number even though they are liquid quenched and tempered may be processed from carbon steel which, in the composition range permitted by this specification, could have a fracture appearance transition temperature (50 % shear) higher than operating temperatures. Therefore, in order to minimize the possibility of a brittle cleavage failure, these lifting eyes should never be loaded above the proof load, and should not be used when surface discontinuities exist on the lifting eyes.

1.2 The specification includes two types denoting shank pattern and one style denoting shank length (both defined in ASME B 18.15) as follows:

1.2.1 Type 1—Plain pattern (straight shank).

1.2.2 Type 2—Shoulder pattern.

1.2.3 Style B—Short length.

1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.