ASTM E2681 : 13

1.1 The framework discussed in this guide is limited to facilities with underground storage tanks (USTs) storing hazardous substances or petroleum at ambient temperature and atmospheric pressure. This guide is not intended to provide detailed technical specifications for implementation of the approaches described in this document, nor to be used as an enforcement tool, but rather to identify the important information used for environmental management of underground tank systems. The term “must” is used where United States federal requirements apply. References to ASTM StandardDetails and other industry guidelines have been provided to address implementation of the approaches discussed in this guide. Many states and some local agencies have adopted UST rules that place additional responsibilities on the owners/operators of UST systems. Refer to state and local regulations that may contain additional requirements. It is not possible to identify all considerations or combinations of conditions pertinent to a unique underground storage tank system.

1.2 This guide addresses principal considerations related to the prevention and response for environmental releases from tank systems and is organized in the sections listed below:

1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Hazards.