logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J2271_200905 : 2009

Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Inch Series)

Standard Details

This SAE Parts Standard provides dimensional and quality assurance requirements for studs in the following configurations in standard materials used for ship system applications:aContinuous thread studs in UNRC and 8UNR series in the following threads and diameters:UNRC threads (1/4 through 4 inches)UNRF threads (1/4 through 1-1/2 inches)8UNR threads (1-1/8 through 4 inches)bDouble end studs (clamping type) where both ends are of the same minimum thread length in the following threads and diameters:UNRC threads (1/4 through 4 inches)UNRF threads (1/4 through 1-1/2 inches)8UNR threads (1-1/8 through 4 inches)Different thread forms on each end are permissible.cDouble end studs (tap end type) where the tap end thread length is equivalent to 1-1/2 nominal diameters:Tap End Thread Forms and DiametersNut End Thread Forms and DiametersNC-5 interference-fit tap end threads (1/4 through 1-1/2 inches)UNRC threads (1/4 through 4 inches)UNRC threads (1/4 through 4 inches)UNRF threads (1/4 through 1-1/2 inches)UNRF threads (1/4 through 1-1/2 inches)8UNR threads (1-1/8 through 4 inches)8UNR threads (1-1/8 through 4 Inches)

Cross Reference: AMS2487,AS1701,ASMEB1.1,ASMEB1.12,ASMEB1.3M,ASMEB18.18.1,ASTMA193/A193M,ASTMA307,ASTMA354,ASTMA380,ASTMA449,ASTMA967,ASTMF1136,ASTMF1470,ASTMF1941,ASTMF2328,ASTMF468,ASTMF593,ASTMF788/F788M,ASTMG98,CIDA-A-59004,J1061,J123,J2270_201606,J429_201405,QQ-N-286

General Information

Status : Revised
Standard Type: Main
Document No: SAE J2271_200905 : 2009
Document Year: 2009
Pages: 31

Life Cycle

Currently Viewing

Revised
SAE J2271_200905 : 2009
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +