logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 60749-9:2017

Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking

Standard Details

IEC 60749-9:2017 is to determine whether the marks on solid state semiconductor devices will remain legible when subjected to the application and removal of labels or the use of solvents and cleaning solutions commonly used during the removal of solder flux residue from the printed circuit board manufacturing process.
This test is applicable for all package types. It is suitable for use in qualification and/or process monitor testing. The test is considered non-destructive. Electrical or mechanical rejects can be used for the purpose of this test.
This edition includes the following significant technical changes with respect to the previous edition:
a) revision to Clause 4 Equipment by a complete rewriting of Clause 3 Terms and definitions;
b) additional variant – ‘adhesive tape pull test’.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 60749-9:2017
Document Year: 2017
Pages: 9
Edition: 2.0
  • Section Volume:
  • TC 47 Semiconductor devices
  • ICS:
  • 31.080.01 Semiconductor devices in general

Life Cycle

Currently Viewing

ACTIVE
IEC 60749-9:2017
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +