logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC TR 60825-13:2011

Safety of laser products - Part 13: Measurements for classification of laser products

Standard Details

IEC 60825-13:2011 provides manufacturers, test houses, safety personnel, and others with practical guidance on methods to perform radiometric measurements or analyses to establish the emission level of laser energy in accordance with IEC 60825-1:2007. The measurement procedures described in this technical report are intended as guidance for classification of laser products in accordance with that standard. Other procedures are acceptable if they are better or more appropriate. Information is provided for calculating accessible emission limits (AELs) and maximum permissible exposures (MPEs), since some parameters used in calculating the limits are dependent upon other measured quantities. This document is intended to apply to lasers, including extended sources and laser arrays. Users of this document should be aware that the procedures described herein for extended source viewing conditions may yield more conservative results than when using more rigorous methods. This second edition brings minor changes and additions in the definitions, the classification flow has been updated, the apparent source sections have been clarified, the scanning has been updated, and more examples and useful conversions have been added to the annexes.

This publication is to be read in conjunction with IEC 60825-1:2007.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC TR 60825-13:2011
Document Year: 2011
Pages: 65
Edition: 2.0
  • Section Volume:
  • TC 76 Optical radiation safety and laser equipment
  • ICS:
  • 31.260 Optoelectronics. Laser equipment

Life Cycle

Currently Viewing

ACTIVE
IEC TR 60825-13:2011
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +