ISO 812:2006

Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness

Standard Details

ISO 812:2006 specifies a method for determining the lowest temperature at which rubber materials do not exhibit brittle failure or the temperature at which half of the test pieces used in a test fail when impacted under specified conditions.

The temperatures thus determined do not necessarily relate to the lowest temperature at which the material can be used since the brittleness will be affected by the conditions of test and especially by the rate of impact. Data obtained by this method should, therefore, be used to predict the behaviour of rubbers at low temperatures only in applications in which the conditions of deformation are similar to those specified in the test.

Three procedures are described:

procedure A, in which the brittleness temperature is determined;
procedure B, in which the brittleness temperature for 50 % failure is determined;
procedure C, in which the test piece is impacted at a specified temperature.

Procedure C is used in the classification of rubber materials and for specification purposes.

General Information

Status : WITHDRAWN

Standard Type: Main

Document No: ISO 812:2006

Document Year: 2006

Pages: 11

Edition: 2

Section Volume:
ISO/TC 45/SC 2. Testing and analysis

ICS:
83.060 Rubber

Preview Document

Life Cycle

WITHDRAWN

ISO 812:2011

Published

ISO 812:2017

Currently Viewing

WITHDRAWN

ISO 812:2006

WITHDRAWN

ISO 812:1991

ISO 812:2006

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form