logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J62_197404 : 1974

RUBBER SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS

Standard Details

This specification describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston. The specification contains the following major sections:1Resistance to Fluid at Elevated Temperature—Physical Stability (loose parts in 120 ±2°C (248 ±3.6°F) brake fluid for 70 h).2Resistance to Fluid at Elevated Temperature—Precipitation Characteristics (loose parts in 120 ±2°C (248 ±3.6°F) brake fluid for 70 h).3Resistance to Elevated Temperatures in Dry Air (loose parts in 175 ±2°C (347 ±3.6°F) air for 22 h).4Ambient Temperature Stroking Test (tested in brake assembly for 500,000 cycles to 7.0 ±0.3 MPa (1000 ±50 psi)).5High Temperature Stroking Test (tested in brake assembly for 70 h (70,000 strokes) at 120 ±2°C (248 ±3.6°F) to 7.0 ±0.3 MPa (1000 ±50 psi)).6Low Temperature Leakage Test (tested in brake assembly for 120 h at −40-42.8°C (−40-45°F)).7Cycling Humidity Storage Corrosion Test (tested in brake assembly for 14 days at 95% humidity cycling between 21-46°C (69.8-114.8°F)).

Cross Reference:

General Information

Status : Issued
Standard Type: Main
Document No: SAE J62_197404 : 1974
Document Year: 1974
Pages: 4

Life Cycle

Currently Viewing

Issued
SAE J62_197404 : 1974
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +