Standards Manage Your Business
We Manage Your Standards
Standards Manage Your Business
We Manage Your Standards
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
Method B (without application of the pressure foot) is preferred in all cases where the foot would damage the test piece through an abrasive effect where this is not required, e.g. materials with sticky surfaces, light coatings such as polyurethanes on rough surfaces.
The test may be carried out on products as delivered or after pre-treatments such as wetting or accelerated ageing.
NOTE The results obtained using method A and method B cannot be compared as there is no correlation between the two methods.
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.
