Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification
ISO 6807:2003 specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C.
This International Standard applies to hoses which are suitable for use at ambient temperatures between -20 °C and +52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions.
This International Standard does not apply to hoses which are intended for use with gases.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.