logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 4080:2009

Rubber and plastics hoses and hose assemblies — Determination of permeability to gas

Standard Details

ISO 4080:2009 specifies three methods for the determination of the volume of gas diffusing through a rubber or plastics hose or length of tubing in a specified time.

  • Method 1: For determining the permeability of the complete hose or length of tubing, excluding end-fittings, to the test gas. The permeability is calculated with respect to the length of the hose or tubing.
  • Method 2: For determining the permeability at the hose/fitting interface. This method is used when determining the permeability characteristics of hoses with an unpricked cover, when the gas usually issues from the textile reinforcement at the cut ends. The permeability is calculated with respect to the length of the hose.
  • Method 3: For determining precisely the permeability of a hose or hose assembly to the test gas. The permeability is calculated with respect to the surface area of the hose lining.

The methods are applicable only to gases which are insoluble in water.

General Information

Status : WITHDRAWN
Standard Type: Main
Document No: ISO 4080:2009
Document Year: 2009
Pages: 8
Edition: 4

Life Cycle

Published

Currently Viewing

WITHDRAWN
ISO 4080:2009

WITHDRAWN
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +