logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 60034-12:2024

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

Standard Details

IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that:
- have a rated voltage up to 1 000 V;
- are intended for direct-on-line or star-delta starting;
- are rated on the basis of duty type S1;
- are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection.
This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27
- new clause on methods for measuring locked-rotor current and torque;
- new informative annex on the general current and torque characteristics with locked rotor;
- new informative annex on correction of voltage and frequency;
- aligned with the requirements for explosion protected motors from TC31 WG27.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 60034-12:2024
Document Year: 2024
Pages: 50
Edition: 4.0
  • Section Volume:
  • TC 2 Rotating machinery

Life Cycle

Currently Viewing

ACTIVE
IEC 60034-12:2024
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +