ISO 5263-2:2004

Pulps — Laboratory wet disintegration — Part 2: Disintegration of mechanical pulps at 20 degrees C

Standard Details

ISO 5263-2:2004 specifies an apparatus and the procedures for the laboratory-wet disintegration of mechanical pulps that do not exhibit latency or pulps where latency has already been removed. This apparatus and procedure are required for preparation of the test portion in a number of other International StandardDetails dealing with pulps.

In principle, this method is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemo-mechanical pulps) that do not exhibit latency, including recovered fibres from mechanical pulps. It is not suitable for mechanical pulps exhibiting latency for which the disintegration procedure described in ISO 5263-3 shall be used.

The procedure specified by ISO 5263-2:2004 should also be used to disintegrate all mechanical pulps to be measured for brightness.

General Information

Status : Published

Standard Type: Main

Document No: ISO 5263-2:2004

Document Year: 2004

Pages: 6

Edition: 1

Section Volume:
ISO/TC 6. Paper, board and pulps

ICS:
85.040 Pulps

Preview Document

Life Cycle

Currently Viewing

Published

ISO 5263-2:2004

ISO 5263-2:2004

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form