ISO 15875-3:2003

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings

Standard Details

ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.

It covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15875-1.

It also specifies the parameters for the test methods referred to in this standard.

In conjunction with the other parts of ISO 15875, it is applicable to fittings made from PE-X and to fittings, made from other materials, intended to be fitted to pipes conforming to ISO 15875-2 to give joints conforming to the requirements of ISO 15875-5.

It is applicable to fittings of the following types:

mechanical fittings
electrofusion fittings
fittings with incorporated inserts.

General Information

Status : Published

Standard Type: Main

Document No: ISO 15875-3:2003

Document Year: 2003

Pages: 11

Edition: 1

Section Volume:
ISO/TC 138/SC 2. Plastics pipes and fittings for water supplies

ICS:
23.040.45 Plastics fittings
91.140.60 Water supply systems

Preview Document

Life Cycle

Currently Viewing

Published

ISO 15875-3:2003

ISO 15875-3:2003

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form