logo

Standards Manage Your Business

We Manage Your Standards

ISO

ISO 6721-2:2019

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

Standard Details

This document specifies two methods (A and B) for determining the linear dynamic mechanical properties of plastics, i.e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz.

NOTE The temperature dependence of these properties, measured over a sufficiently broad range of temperatures (for example from −50 °C to +150 °C for most commercially available plastics), gives information on the transition regions (for example the glass transition and the melting transition) of the polymer. It also provides information concerning the onset of plastic flow.

The two methods described are not applicable to non-symmetrical laminates (see ISO 6721-3). The methods are not suitable for testing rubbers, for which the user is referred to ISO 4664-2.

General Information

Status : Published
Standard Type: Main
Document No: ISO 6721-2:2019
Document Year: 2019
Pages: 13
Edition: 3

Life Cycle

Currently Viewing

Published
ISO 6721-2:2019
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +