Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
This document describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 μm. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests.
This document covers the scribing of metallic panels or test pieces (chemically treated or not) made from:
— steel;
— galvanized steel;
— aluminium alloys;
— magnesium alloys.
It does not cover the scribing of electroplated metal or clad aluminium panels.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.