ISO 1519:2011

Paints and varnishes — Bend test (cylindrical mandrel)

Standard Details

ISO 1519:2011 specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.

For a multi-coat system, each coat can be tested separately or the complete system can be tested.

The method specified can be carried out

either as a “pass/fail” test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement;
or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate.

Two types of apparatus are specified, type 1 being appropriate for use on test panels of thickness up to 0,3 mm, and type 2 for use on test panels of thickness up to 1,0 mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.

General Information

Status : Published

Standard Type: Main

Document No: ISO 1519:2011

Document Year: 2011

Pages: 9

Edition: 3

Section Volume:
ISO/TC 35/SC 9. General test methods for paints and varnishes

ICS:
87.040 Paints and varnishes

Preview Document

Life Cycle

Currently Viewing

Published

ISO 1519:2011

WITHDRAWN

ISO 1519:2002

WITHDRAWN

ISO 1519:1973

ISO 1519:2011

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form