CSA ISO 10855-3:20

CSA Preface This is the first edition of CSA ISO 10855-3, Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 10855-3 (first edition, 2018-05). This Standard is intended to be used in conjunction with CSA ISO 10855-1:20, Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers (adopted ISO 10855-1:2018). StandardDetails development within the Canadian Offshore Structures sector is harmonized with international StandardDetails development. This Standard has been developed in compliance with StandardDetails Council of Canada requirements for National StandardDetails of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855-1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included. Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B. Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.