logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC TS 62607-6-12:2024

Nanomanufacturing - Key Control Characteristics - Part 6-12: Graphene - Number of layers: Raman spectroscopy, optical reflection

Standard Details

IEC TS 62607-6-12:2024 establishes a standardized method to determine the key control characteristic
- number of layers
for films consisting of graphene by
- Raman spectroscopy and
- optical reflection.
Criteria for the determination of the number of layers are the G-peak integrated intensity and the optical contrast. Both methods enable to distinguish between graphene and multilayer graphene. However, neither method on its own nor the combination of the two enable a determination of the number of layers in all possible cases (especially regarding all possible stacking angles). But the comparison of the values deduced by each method allows to discriminate whether the determined number of layers is correct and can be specified or not.
- The method is applicable to exfoliated graphene and graphene grown on or transferred to a substrate with a small defect density, low surface contamination (e.g. transfer residue) and number of layers up to 5.
- The method is suitable for the following substrates:
a) glass (soda lime glass or similar with a refractive index between 1,45 and 1,55 at 532 nm);
b) oxidized silicon (SiO2 on silicon, with a SiO2 thickness of 90 nm ± 5 nm).
- The spatial resolution is in the order of 1 µm given by the spot size of the exciting laser.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC TS 62607-6-12:2024
Document Year: 2024
Pages: 32
Edition: 1.0
  • Section Volume:
  • TC 113 Nanotechnology for electrotechnical products and systems

Life Cycle

Currently Viewing

ACTIVE
IEC TS 62607-6-12:2024
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +