logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE 2008-01-1702 : 2008

Modeling of Two Charge-air Cooling Turbo-charging Systems for Spark Ignition Engines

Standard Details

Two charge-air cooling turbo-charging systems, named Turbo-Cool and T 2xC, have been introduced. Turbo-Cool employs an air turbine expander/suction-compressor unit in the intake side and a VGT in the exhaust side, while T 2xC employs an air turbine expansion in the intake side and an exhaust VGT with a same shaft with the air turbine. A Nissan SR20DET turbocharged gasoline engine with the two charge-air cooling turbo-charging systems have been modeled using GT-SUITE 6.0 engine simulation code. Modeling results show that either Turbo-Cool or T 2xC must be combined with exhaust VGT. The air turbine in both systems can be either VGT or fixed. Modeling results also show that the power at WOT and rated engine speed of the engine with the proposed charge-air cooling turbo-charging systems can be increased by 20∼30%, the maximum torque at WOT can be increased by 46∼71%, and the BSFC at WOT and rated engine speed can be decreased by 4∼5%. The large improvement of the torque at middle and low engine speed can result in an excellent torque back-up and correspondingly drivability for vehicle use.

Cross Reference:

General Information

Status : ACTIVE
Standard Type: Main
Document No: SAE 2008-01-1702 : 2008
Document Year: 2008

Life Cycle

Currently Viewing

ACTIVE
SAE 2008-01-1702 : 2008
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +