logo

Standards Manage Your Business

We Manage Your Standards

    Log in / Signup cart wishlist
    ISO

    ISO 4866:2010

    Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures

    Standard Details

    ISO 4866:2010 establishes principles for carrying out vibration measurement and processing data with regard to evaluating vibration effects on structures. It does not cover the source of excitation except when the source dictates dynamic range, frequency or other relevant parameters. The evaluation of the effects of structural vibration is primarily obtained from the response of the structure, using appropriate analytical methods by which the frequency, duration and amplitude can be defined. ISO 4866:2010 only deals with the measurement of structural vibration and excludes the measurement of airborne sound pressure and other pressure fluctuations, although response to such excitations is taken into consideration.

    ISO 4866:2010 applies to all structures built above or below ground. Such structures are used or maintained and include buildings, structures of archaeological and historical value (cultural heritage), bridges and tunnels, gas and liquid installations including pipelines, earth structures (e.g. dykes and embankments), and fixed marine installations (e.g. quays and wharfs).

    ISO 4866:2010 does not apply to some special structures, including nuclear plants and dams.

    The response of structures depends upon the excitation. ISO 4866:2010 examines the methods of measurement as affected by the source of excitation, i.e. frequency, duration, and amplitude as induced by any source (e.g. earthquake, hurricane, explosion, wind loading, airborne noise, sonic boom, internal machinery, traffic, and construction activities).

    General Information

    Status : Published
    Standard Type: Main
    Document No: ISO 4866:2010
    Document Year: 2010
    Pages: 40
    Edition: 2
    • Section Volume:
    • ISO/TC 108/SC 2. Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
    • ICS:
    • 17.160 Vibrations, shock and vibration measurements
    • 91.120.25 Seismic and vibration protection
    Preview Document

    Life Cycle

    Currently Viewing

    Published
    ISO 4866:2010

    WITHDRAWN
    ISO 4866:1990
    Knowledge Corner

    Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

    © Copyright 2024 BSB Edge Private Limited.

    Enquire now +
    This Website Uses Cookies to Manage Services