ISO 20998-3:2017

Measurement and characterization of particles by acoustic methods — Part 3: Guidelines for non-linear theory

Standard Details

ISO 20998-3:2017 gives guidelines for ultrasonic attenuation spectroscopy methods for determining the size distributions of one or more material phases dispersed in a liquid at high concentrations, where the ultrasonic attenuation spectrum is not a linear function of the particle volume fraction. In this regime, particle-particle interactions are not negligible.

ISO 20998-3:2017 is applicable to colloids, dispersions, slurries, and emulsions. The typical particle size for such analysis ranges from 10 nm to 3 mm, although particles outside this range have also been successfully measured. Measurements can be made for concentrations of the dispersed phase ranging from about 5 % by volume to over 50 % by volume, depending on the density contrast between the continuous and the dispersed phases, the particle size, and the frequency range^[⁹^{] [}¹⁰^]. These ultrasonic methods can be used to monitor dynamic changes in the size distribution, including agglomeration or flocculation.

General Information

Status : Published

Standard Type: Main

Document No: ISO 20998-3:2017

Document Year: 2017

Pages: 24

Edition: 1

Section Volume:
ISO/TC 24/SC 4. Particle characterization

ICS:
19.120 Particle size analysis. Sieving

Preview Document

Life Cycle

Currently Viewing

Published

ISO 20998-3:2017

ISO 20998-3:2017

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form