logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 60404-8-4:2022 (EN-FR)

Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state

Standard Details

IEC 60404-8-4:2022 defines the grades of cold-rolled non-oriented electrical steel strip and sheet in nominal thicknesses of 0,35 mm, 0,47 mm, 0,50 mm, 0,65 mm and 1,00 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedure. The nominal thickness 0,47 mm applies to the grades for use at 60 Hz only. This document applies to cold-rolled non-oriented electrical steel strip and sheet supplied in the fully-processed state, i.e. the final annealed condition, in coils or sheets, and intended for the construction of magnetic circuits. This document does not apply to materials supplied in the semi-processed state. This edition includes the following significant technical changes with respect to the previous edition:
- modification of terms and technical requirements concerning geometrical characteristics to be consistent with IEC 60404-9:2018;
- insertion of Table 3 - Tolerances on nominal thickness;
- change of the length of test specimen for determination of geometrical characteristics from 2 m to 1 m.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 60404-8-4:2022 (EN-FR)
Document Year: 2022
Pages: 52
Edition: 4.0
  • Section Volume:
  • TC 68 Magnetic alloys and steels
  • ICS:
  • 17.220.20 Measurement of electrical and magnetic quantities
  • 29.030 Magnetic materials

Life Cycle

Currently Viewing

ACTIVE
IEC 60404-8-4:2022 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +