logo

Standards Manage Your Business

We Manage Your Standards

IEEE

IEEE 1241:2023

IEEE Standard for Terminology and Test Methods for Analog-to-Digital Converters

Standard Details

Scope

The material presented in this standard is intended to provide common terminology and test methods for the testing and evaluation of analog-to-digital converters (ADCs). This standard considers only those ADCs whose output values are extracted (sampled) and then digitized at known time intervals. In general, this quantization is assumed to be nominally uniform (the input-output transfer curve is approximately a straight line) as discussed further in 1.4, and the sampling is assumed to be at a nominally uniform rate. Some but not all of the test methods in this standard can be used for ADCs that are designed for non-uniform quantization.

Purpose

This standard identifies ADC error sources and provides test methods with which to perform the required error measurements. The information in this standard is useful both to manufacturers and to users of ADCs in that it provides a basis for evaluating and comparing existing devices, as well as providing a template for writing specifications for the procurement of new ones. In some applications, the information provided by the tests described in this standard can be used to correct ADC errors, e.g., correction for gain and offset errors. The reader should note that this standard has many similarities to IEEE Std 1057™. Many of the tests and terms are nearly the same, since ADCs are a necessary part of digitizing waveform recorders.

Abstract

Revision Standard - Active. The material presented in this standard is intended to provide common terminology and test methods for the testing and evaluation of analog-to-digital converters (ADCs). This standard considers only those ADCs whose output values are extracted (sampled) and then digitized at known time intervals. In general, this quantization is assumed to be nominally uniform (the input-output transfer curve is approximately a straight line) and the sampling is assumed to be at a nominally uniform rate. Some but not all of the test methods in this standard can be used for ADCs that are designed for non-uniform quantization.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEEE 1241:2023
Document Year: 2023
Pages: 143
  • ICS:
  • 31.200 Integrated circuits. Microelectronics

Life Cycle

Currently Viewing

ACTIVE
IEEE 1241:2023
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +