ISO 23044:2020

Guidelines for softening and desalination of industrial wastewater for reuse

Standard Details

This document provides guidance on, the evaluation and comparison of wastewater softening and desalination processes for industrial wastewater reclamation and reuse with specific consideration for the following six: 1) chemical precipitation; 2) ion exchange; 3) nanofiltration (NF); 4) reverse osmosis (RO); 5) electrodialysis (ED) and 6) electrodeionization (EDI). This document provides guidance on the characterisation of both influent and effluent quality (e.g. hardness, alkalinity, etc.) and the effects of these processes on those constituents. The purpose of softening and desalination is only for the reuse usages that have requirements for hardness and salinity, such as cooling circulating water, boiler water, production process water, and cleaning water.

This document includes the following sub-processes of wastewater softening and desalination processes:

a) wastewater softening processes based on chemical precipitation, ion exchange and NF, which aim to remove hardness ions, such as Mg²⁺ and Ca²⁺;

b) desalination processes based on ion exchange, RO, ED, EDI and NF, which aim to remove the most of total dissolved solids (TDS).

This document is applicable to:

a) industrial saline wastewater, which has been pre-treated to remove most of the organic matters if necessary;

b) the selection or design of wastewater softening and desalination processes for reuse of wastewater from industries.

General Information

Status : Published

Standard Type: Main

Document No: ISO 23044:2020

Document Year: 2020

Pages: 15

Edition: 1

Section Volume:
ISO/TC 282/SC 4. Industrial water reuse

ICS:
13.030.20 Liquid wastes. Sludge
13.030.40 Installations and equipment for waste disposal and treatment

Preview Document

Life Cycle

Currently Viewing

Published

ISO 23044:2020

ISO 23044:2020

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form