CSA C802.4:13 (R2023)

Preface This is the first edition of CSA C802.4, Guide for kVA Sizing of Dry-Type Transformers, 1.2kV Class, Single-Phase and Three-Phase. CSA Group gratefully acknowledges the contribution of BC Hydro, Manitoba Hydro, Hydro Québec, Canadian Electricity Association (CEA), Efficiency Nova Scotia, and Sask Power in the development of this Standard. This Guide was prepared by the Subcommittee on Dry-Type Transformer Efficiency, under the jurisdiction of the Technical Committee on Industrial Equipment and the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 The Guide applies to all 1.2 kV class dry -type transformers covered under CSA C22.2 No. 47 and CSA C9 for commercial and industrial applications. 1.2 The Guide is not intended to apply to transformers applying specialty loads such as drive transformers, rectifier transformers, grounding transformers, and mining transformers. 1.3 Not included in this Guide is the treatment of harmonics, it being recognized that the forecasting and treatment of load harmonics and voltage harmonics is a significant concern in itself. Note - It is planned that harmonics will be addressed in a future edition. 1.4 The Guide is to be considered for both new installations and the replacement of existing installations.