logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 62977-2-1:2021

Electronic displays - Part 2-1: Measurements of optical characteristics - Fundamental measurements

Standard Details

IEC 62977-2-1:2021(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic display modules and systems. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical OETFs such as defined in IEC 61966-2-1, ITU BT. Rec. 601, ITU BT. Rec.709, and ITU BT. Rec.2020. The tests in this document are not approved for use with HDR input signals.
NOTE A flat panel or flat panel display is a display with a flat surface and minimal depth that emits visible light from the surface. The display is subdivided into an array of electronically driven pixels which can be light valves modulating a backlight, or self-luminous. Emissive/transmissive/reflective hybrid displays can be flat panel or flat panel displays.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 62977-2-1:2021
Document Year: 2021
Pages: 82
Edition: 1.0
  • Section Volume:
  • TC 110 Electronic display devices
  • ICS:
  • 31.120 Electronic display devices
  • 31.260 Optoelectronics. Laser equipment

Life Cycle

Currently Viewing

ACTIVE
IEC 62977-2-1:2021
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +