CSA IEC 61000-4-12:19 (R2024)

CSA Preface This is the third edition of CSA IEC 61000-4-12, Electromagnetic compatibility (EMC) — Part 4-12: Testing and measurement techniques — Ring wave immunity test, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61000-4-12 (third edition, 2017-07). It supersedes the previous edition, published in 2013 as CAN/CSA-IEC 61000-4-12 (adopted IEC 61000-4-12:2006). This Standard has been developed in compliance with StandardDetails Council of Canada requirements for National StandardDetails of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, to ring waves occurring in low-voltage power, control and signal lines supplied by public and non-public networks. The object of this document is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to ring waves. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. NOTE As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard is applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity test and test levels for their products. This document defines: – test voltage and current waveforms; – a range of test levels; - test equipment; – test setups; – test procedures.