IEC 60364-1:1992

Applies to electrical installations such as those of: a)residential premises b)commercial premises c)public premises d)industrial premises e)agricultural and horticultural premises f)prefabricated buildings g)caravans, caravan sites and similar sites h)construction sites, exhibitions, fairs and other temporary installations. i)marinas and pleasure craftCovers: a)circuits supplied at nominal voltages up to and including 1000 V a.c. or 1500 V d.c. b)circuits, other than the internal wiring of apparatus, operating at voltages exceeding 1000 V and derived from an installation having a voltage not exceeding 1 000 V a.c., e.g. discharge lighting, electrostatic precipitators c)any wiring not specifically covered by the StandardDetails for appliances d)all consumers' installations external to buildings; e)fixed wiring for telecommunication, signalling, control and the like (excluding internal wiring of apparatus) f)the extension or alteration of the installation and also parts of the existing installation affected by the extension or alteration.Does not apply to: a)electric traction equipment b)electrical equipment of motor vehicles c)electrical installations on board ships d)electrical installations in aircraft e)public street-lighting installations f)installations in mines g)radio interference suppression equipment, except in so far as it affects the installation's safety h)electric fences i)lightning protection of buildingsNote: -Atmospheric phenomena are however covered, in so far as effects on the electrical installations are concerned (e.g. with respect to selection of lightning arresters).Contains the rules for the design and erection of electrical installations so as to ensure safety and proper functioning for the use intended.Note: -For identification of insulated and bare conductors by colours, see IEC 60446.