ISO 2719:2002

Determination of flash point — Pensky-Martens closed cup method

Standard Details

ISO 2719:2002 describes two procedures, A and B, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions and other liquids. It is applicable for liquids with a flash point above 40 degrees C.

Procedure A is used for the determination of the flash point of paints and varnishes that do not form a surface film, unused lubricating oils and other petroleum products not covered by Procedure B.

Procedure B is used for the determination of the flash point of residual fuel oils, cutback bitumens, used lubricating oils, liquids that tend to form a surface film, liquids with suspensions of solids and highly viscous materials such as polymeric solutions and adhesives.

ISO 2719:2002 is not applicable to water-borne paints or liquids contaminated by traces of highly volatile materials.

General Information

Status : WITHDRAWN

Standard Type: Main

Document No: ISO 2719:2002

Document Year: 2002

Pages: 21

Edition: 3

Section Volume:
ISO/TC 28. Petroleum and related products, fuels and lubricants from natural or synthetic sources

ICS:
75.080 Petroleum products in general

Preview Document

Life Cycle

Published

ISO 2719:2016

Currently Viewing

WITHDRAWN

ISO 2719:2002

WITHDRAWN

ISO 2719:1988

WITHDRAWN

ISO 2719:1973

ISO 2719:2002

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form