ISO 17641-2:2005

Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests

Standard Details

ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests.

The following tests are described:

T-joint weld cracking test;
weld metal tensile test;
longitudinal bend test.

The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.

This International Standard applies primarily to fully austenitic stainless steels; nickel, nickel-base and nickel-copper weld metals. It can also be used for other weld metals.

ISO 17641-2:2005 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

General Information

Status : WITHDRAWN

Standard Type: Main

Document No: ISO 17641-2:2005

Document Year: 2005

Pages: 14

Edition: 1

Section Volume:
ISO/TC 44/SC 5. Testing and inspection of welds

ICS:
25.160.40 Welded joints and welds

Preview Document

Life Cycle

Published

ISO 17641-2:2015

Currently Viewing

WITHDRAWN

ISO 17641-2:2005

ISO 17641-2:2005

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form