logo

Standards Manage Your Business

We Manage Your Standards

IEC

IEC 60512-9-3:2011 (EN-FR)

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

Standard Details

IEC 60512-9-3:2011 defines a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes a specified electrical load. This second edition cancels and replaces Test 9c of IEC 60512-5, issued in 1992, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows:
- An additional requirement to 4.1 stating that if more than one electrical circuit is wired for testing, the wiring shall be carried out in a parallel electrical circuit.
- Subclauses 4.3 through 4.7 were removed and replaced by 4.2 through 4.4.

This publication is to be read in conjunction with ;a href=;http:;;webstore.iec.ch;webstore;webstore.nsf;ArtNum_PK;26692;;IEC 60512-1:2001;;a; and ;a href=;http:;;webstore.iec.ch;webstore;webstore.nsf;ArtNum_PK;35881;;IEC 60512-1-100:2006;;a;.

General Information

Status : ACTIVE
Standard Type: Main
Document No: IEC 60512-9-3:2011 (EN-FR)
Document Year: 2011
Pages: 17
Edition: 2.0
  • ICS:
  • 31.220.01 Electromechanical components in general

Life Cycle

Currently Viewing

ACTIVE
IEC 60512-9-3:2011 (EN-FR)
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +