logo

Standards Manage Your Business

We Manage Your Standards

SAE

SAE J1502_202205 : 2022

Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic

Standard Details

SAE J1502 specifies dimensions, performance requirements, and test procedures for the male half of a diagnostic coupler with either a metric M14x1.5 or an inch 9/16-18 straight thread stud end. The coupler is designed for use with a mineral-based hydraulic fluid. It is used on machines specified in SAE J1116. It does not apply to the mating hydraulic quick action couplings not on the machine.Diagnostic couplings in accordance with SAE J1502 may be used at a working pressure of 42 MPa. The permissible working pressure depends upon the materials, design, working conditions, application, etc.Conformance to the dimensional information in this part of SAE J1502 does not guarantee rated performance. Each manufacturer should perform testing according to the specification contained in this document to ensure that components comply with the performance rating.

Cross Reference: ASME/B1.1,ASME/B46.1,ASTMB117,ASTMB633,ISO11926-2,ISO1302,ISO15171-1,ISO19879,ISO261,ISO4579-1,ISO5598,ISO6149-2,ISO6508,ISO725,ISO9227,ISO965-1,J1116,J1116_201301,J1298_201704,J1926-2,J1926/2_201609,J515_201511

General Information

Status : Revised
Standard Type: Main
Document No: SAE J1502_202205 : 2022
Document Year: 2022
Pages: 8

Life Cycle

Currently Viewing

Revised
SAE J1502_202205 : 2022
Knowledge Corner

Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!

© Copyright 2024 BSB Edge Private Limited.

Enquire now +