ISO 23658:2020

Buildings and civil engineering works — Sealants — Testing of adhesion properties using a bead peel test

Standard Details

The document specifies a method for evaluating the adhesion of sealants with a minimum elongation at break of 25 % (according to ISO 8339, Method A or B) on various substrates. This test method can be used for one-component and multi component sealants. This method is typically used for elastic sealants but can be also used for plastic sealants. For plastic sealants, the test can be more difficult and needs to be carried out by experienced technicians.

This test is used to judge the adhesion of construction sealants in combination with cleaners, activators and/or primers on various substrates when exposed to a peeling force and also after different aging conditions.

An adhesion test according to this document can also be conducted for process monitoring and quality assurance accompanying production. The test method described in this document is not intended to replace any adhesion cohesion test methods specified in ISO 11600.

General Information

Status : Published

Standard Type: Main

Document No: ISO 23658:2020

Document Year: 2020

Pages: 9

Edition: 1

Section Volume:
ISO/TC 59/SC 8. Sealants

ICS:
91.100.50 Binders. Sealing materials

Preview Document

Life Cycle

Currently Viewing

Published

ISO 23658:2020

ISO 23658:2020

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form