Standards Manage Your Business
We Manage Your Standards
Standards Manage Your Business
We Manage Your Standards
Air quality — Environmental meteorology — Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar
This document describes the determination of the line-of-sight wind velocity (radial wind velocity).
NOTE Derivation of wind vector from individual line-of-sight measurements is not described in this document since it is highly specific to a particular wind lidar configuration. One example of the retrieval of the wind vector can be found in Annex B.
ISO 28902-2:2017 does not address the retrieval of the wind vector.
ISO 28902-2:2017 may be used for the following application areas:
- meteorological briefing for, e.g. aviation, airport safety, marine applications and oil platforms;
- wind power production, e.g. site assessment and power curve determination;
- routine measurements of wind profiles at meteorological stations;
- air pollution dispersion monitoring;
- industrial risk management (direct data monitoring or by assimilation into micro-scale flow models);
- exchange processes (greenhouse gas emissions).
ISO 28902-2:2017 addresses manufacturers of heterodyne pulsed Doppler wind lidars, as well as bodies testing and certifying their conformity. Also, this document provides recommendations for the users to make adequate use of these instruments.
Currently Viewing
Expand Your Knowledge and Unlock Your Learning Potential - Your One-Stop Source for Information!
© Copyright 2024 BSB Edge Private Limited.
