ISO/TS 7849-2:2009

Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor

Standard Details

ISO/TS 7849-2:2009 gives basic requirements for a reproducible method for the determination of the sound power level of the noise emitted by machinery or equipment by using surface vibration measurements, together with the knowledge of the machinery specific sound radiation factor in the frequency bands. The method is only applicable to noise which is emitted by vibrating surfaces of solid structures and not to noise generated aerodynamically.

This vibration measurement method is especially applicable in cases where accurate direct airborne noise measurements, e.g. as specified in ISO 3746, ISO 3747, and ISO 9614 (all parts), are not possible because of high background noise or other parasitic environmental interferences; or, if a distinction is required between the total radiated sound power and its structure vibration generated component.

The methods described in ISO/TS 7849-2:2009 apply mainly to processes that are stationary with respect to time.

Recommendations on the selection of frequency bands are given in an annex.

General Information

Status : Published

Standard Type: Main

Document No: ISO/TS 7849-2:2009

Document Year: 2009

Pages: 27

Edition: 1

Section Volume:
ISO/TC 43/SC 1. Noise

ICS:
17.140.20 Noise emitted by machines and equipment

Preview Document

Life Cycle

Currently Viewing

Published

ISO/TS 7849-2:2009

ISO/TS 7849-2:2009

Standard Details

General Information

Life Cycle

Add Standards To Trackedge

Enquiry Form